Specifications

If you need any further advice, please call our Technical Helpline on :-
0181 758 0338 (Mon-Fri)
Listening to the radio
FM operation
1. Ensure that the Operation switch is in the 'Manual' position.
2. Set the Function switch to the 'Radio' position.
3. Select 'FM' using the Waveband switch.
4. Adjust the Volume control until a hissing sound is heard.
5. The Telescopic aerial (17) which is only operational on FM, should be
fully extended.
6. Carefully tune to the desired station using the Tuning control.
7. Angle and rotate the Telescopic aerial to a position giving the best
reception. A knuckle joint at the base of the aerial allows this movement
and an angle of 45 degrees will usually be satisfactory. The FM band
is marked in Megahertz (MHz).
8. To switch off the radio set the Function switch to the 'Tape Off '
position.
Operation
Auto
Buzz
Manual
Function
Radio Tape
Off
FM MW LW
Waveband
Volume
Ma
x
Mi
n
Tunin
g
Function
Radio Tape
Off
Pow er
540
150
600
180160 2 00
800
220 240
1000
260
12 00 160 0 kHz
kHz
MW
LW
FM
88 94 96 100 104 106 108
MHz
Alarm off M ode Set
3 Band Radio Cassette Recor der
with Programmable Cloc k Alarm
RC 9907
ROBERTS
4