Specifications

17
Manual tuning
The earphone lead should be extended as much as possible to increase
FM reception.
For MW (AM) reception there is a built in ferrite aerial. Rotate your radio
to the position giving best reception.
1. Press and release the Power button to switch on your radio.
2. To select the required waveband repeatedly press the Band button.
3. Push the Jog wheel up or down to tune to a station. With each
push of the jog wheel the frequency will advance in the following
increments.
FM 50kHz or 100kHz (see choosing step size page 25)
MW (AM) 9kHz or 10kHz (see choosing step size page 25)
4. Adjust the Volume to the required setting.
5. When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
6. To switch off your radio press and hold the Power button.