Instruction manual

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
51
Headphone socket
A 3.5mm stereo Headphone Socket is provided on the rear of your sound
system for use with headphones. Inserting a plug automatically mutes the
internal loudspeakers.
IMPORTANT: Excessive sound pressure from earphones and headphones
can cause hearing loss.
Optical S/PDIF output socket
A digital output socket providing an S/PDIF signal is provided on the rear
of your radio for connection to an amplifier, mini-disc or other equipment
with a digital optical input.
This feature is only available for CD/SD and USB playback. It is not active
in iPod, DAB or FM modes.
Aerial removal
The fitted telescopic aerial is suitable for most applications. A wire aerial
is provided as an alternative, and the telescopic aerial may be removed
to allow this to be fitted, or to allow connection to an external aerial using
a coaxial cable.
First remove the two small screws holding the antenna connector cover
in place (use a small cross-head screw driver). Then using the supplied
spanner, remove the telescopic aerial by rotating in an anti-clockwise
direction when viewed from the rear of the product.
The wire aerial simply pushes on to the exposed F-type connector.
Audio and Setup .