Instruction manual

Manual tuning - FM

1. Press the On / Standby button to switch on your sound system.

2. Press and release the Radio button to select the FM band and fully

extend the Telescopic aerial for optimal FM reception.

3. Press the Tuning Up

or Down buttons to tune to a station. The

frequency will change in steps of 50kHz. Pressing and holding one

of the buttons will advance the frequency selection several times each

second.

4. When the end of the waveband is reached the radio will recommence

tuning from the opposite end.

5. Set the Volume to the desired setting.

6. To switch off your sound system press the

On / Standby button.

1,6

FM stereo / mono

1. If an FM station is received with a weak signal some hiss may be

audible. To reduce the hiss press and release the Select button so

that the Stereo indicator on the display is cancelled. Your radio will

switch to mono mode.

2. To return to stereo mode press and release the Select

button so that Stereo indicator on the display is visible. The radio

will switch to stereo mode.

1,2