Specifications

System reset

If your radio fails to operate correctly, or some digits on the display are

missing or incomplete carry out the following procedure.

1. Press the On / Standby button to switch on your clock radio. Press

and release the Band button until the DAB or FM band is selected.

2. Press and hold the Menu/Info button until the Advanced DAB or FM

menu shows on the display and then release the button.

3. Press the Tuning Up or Down buttons until 'System Setting' appears

on the display. Press and release the Select button.

4. Press the Tuning Up or Down buttons until 'Factory Reset' appears

on the display. Press and release the Select button.

5. Press the Tuning Up or Down buttons until 'Yes' is highlighted on the

display. If you do not wish to carry out a system reset, highlight 'No'

and then press the Select button. The display will revert back to the

previous display.

6. With 'Yes' highlighted, press and release the Select button. A full reset

will be performed. The station list and presets will be erased. Alarms

will be cancelled and sleep timer settings will be set to their default

values. The display will show 'Welcome to Digital Radio' and the unit

will behave as when ﬁ rst switched on (see page 4).

In case of malfunction due to electrostatic discharge, reset the product

(reconnection of power source may be required) to resume normal

operation.

If a problem persists our technical staff would be pleased to offer any

assistance on operating the radio. Our technical helpline number is

020 8758 0338.

3-5

3-6

DAB

System Setting

Factory Reset

Factory Reset?

Yes