Specifications

Recording to SD / USB
Your Blutune 200 sound system has been designed to allow you to make
recordings to SD / SDHC cards or to USB connected memory devices.
Recordings are made in MP3 format at 128k bits per second.
SD / SDHC or USB memory media must use the FAT or FAT32 fi le system
in order to operate with the Blutune 200. Such media is usually supplied
already formatted or can be formatted using a PC with a suitable card
reader (for SD / SDHC cards) or USB connection (for USB memory).
It is possible to record onto media which already contains fi les written
by the radio or your computer. The recorded fi les will be added to those
already present on the media.
Making a recording
1. Select the desired source for the recording (DAB, FM, CD, etc.).
AUX-IN is shown in the illustration. Set the volume to the required
listening level (the volume of the recording will not be affected by this).
2. Insert the media on to which the recording is to be made.
3. Press and hold the Record button. The display will show "Record
init...".
If only one media type is present, then after a short while recording
will start.
If both SD and USB media are detected, then a menu is offered to
allow you to choose between Card and USB recording. Select one or
the other as needed using the Tuning Up or Down buttons and then
press the Select button. Recording will then start with the recording
duration being shown on the display.
1,3
AUX IN
AUX
AUX IN
AUX
Record init...
AUX IN
AUX
REC 0:01:23
40
DAB/DAB+ ( Band III ) : 5A - 13F
SD / USB