Installation Guide

ManualsBrandsRoberts ManualsFlooring8600 10 oz. NOSEBOND Stair Nose Adhesive for Interior Installation of Wood, Laminate, and Rigid PVC Stair Nosing

86008600

1. PRODUCT NAME

ROBERTS

8600 NOSE BOND

Stair Nose Adhesive

2. MANUFACTURER INFORMATION

Roberts Consolidated Industries, Inc.

300 Cross Plains Blvd

Dalton, GA 30721

(866) 435-8665 / (706) 277-5294

3. DESCRIPTION

ROBERTS 8600 NOSE BOND

is a low VOC (2 g/L), advanced acrylic adhesive

speciﬁcally designed for interior stair nose installation on properly prepared

wood subﬂoors. Use with wood, laminate and rigid PVC stair nose used with

vinyl ﬂoors.

Features and Benets

• Ideal for wood, laminate and rigid PVC stair nosing

• Can also be used for wood moldings, wood trim installs and repairs

• Residential to light commercial trafﬁc

• Enviro-Friendly—solvent-FREE, and LED compliant; VOC > 2 g/L,

SCAQMD Rule 1168

• GoldGuard

antimicrobial product protection

• Water resistant

• VOC-compliant

Meets Environmental Standards

LEED

EQc 4.1

(100 g/L limit)

SCAQMD, Rule 1168

(100 g/L limit)

PASSES PASSES

Uses

For bonding wood, laminate and rigid PVC stair nose used with vinyl ﬂoors.

Limitations

• Not for use over non-porous or painted surfaces.

• Ensure adequate ventilation during ﬂooring installation.

• Refer to ROBERTS 8600 NOSE BOND

Safety Data Sheet,

www.robertsconsolidated.com, industry standards, and manufacturer’s

guidelines and speciﬁc recommendations prior to installation for

additional information.

4. TECHNICAL DATA

Product Type:

Advanced Acrylic Adhesive

Color:

Beige

Odor:

Very mild, non-offensive

Open Time:

Up to 20 minutes

Working Time:

Up to 30 minutes

VOC:

< 2 g/L

Shelf Life:

1 year in unopened container

Storage:

Protect from freezing. Does not require thinning.

Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com

Stair Nose Adhesive

Summary of content (2 pages)

PAGE 1
8600 Stair Nose Adhesive 1. PRODUCT NAME ROBERTS ® 8600 NOSE BONDTM Stair Nose Adhesive Uses For bonding wood, laminate and rigid PVC stair nose used with vinyl floors. 2. MANUFACTURER INFORMATION Limitations • Not for use over non-porous or painted surfaces. Roberts Consolidated Industries, Inc. 300 Cross Plains Blvd Dalton, GA 30721 (866) 435-8665 / (706) 277-5294 3.
PAGE 2
8600 5. INSTRUCTIONS 7. WARRANTY Preparation Surface must be clean, dry and free of contaminates that might interfere with the bond or the installation. Installation Apply a serpentine pattern bead of adhesive to the underside of the stair nose, and bead along the inside front edge. Press the stair nose into place. Apply mechanical fasteners (as needed) per manufacturer’s guidelines.