Product Brochure

7500
Vinyl Seam Sealer
For Sheet Flooring
1. PRODUCT NAME
ROBERTS
®
7500 Vinyl Seam Sealer
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
ROBERTS 7500 Vinyl Seam Sealer is a strong and durable seaming adhesive
designed to economically seal seams in sheet flooring. It is a non-flammable,
solvent-free vinyl seam sealer designed to save time and cost, compared to
heat welding on commercial vinyl applications.
Features and Benefits
• Designed to economically seal seams in sheet flooring
• Develops a durable bond and can be walked on within 2 hours
• Provides a clean, continuous seam; reducing dirt collection
• Easy installation and easy clean-up
• UV tracers for easy identification
• Enviro-friendly – solvent-free and LEED
®
compliant; VOC: < 1 g/L,
SCAQMD Rule 1168
Uses
For the interior use only. Used to seal seams for linoleum, vinyl-backed,
felt-backed, heterogeneous and inlaid, light commercial glass-backed and
residential felt-backed sheet goods.
Coverage
1/8" bead, approximately 144 lineal feet per 8 oz bottle.
Limitations
• For interior installations only.
• Not recommended for health care installations where an aseptic
environment is necessary. Heat-welded seams are recommended for those
types of applications.
• Materials and area temperature must be between 18-35°C/65-95°F
with a maximum RH of 65% for 48 hours before and during installation
as well as for 72 hours afterward. Ensure adequate ventilation during
flooring installation.
• Refer to SDS, www.robertsconsolidated.com, industry standards,
and manufacturer’s guidelines and specific recommendations prior to
installation for additional information.
4. TECHNICAL DATA
Product Type:
Water Based Resin
Color:
White
Odor:
Very mild, non-offensive
Working Time:
Up to 15 minutes
VOC:
< 1 g/L
pH:
Must not exceed 5.5
Shelf Life:
1 year in unopened container
Storage:
Protect from freezing
5. INSTRUCTIONS
Installation
Prepare flooring according to manufacturer’s instructions. Apply a bead
approximately 1/8” along the entire edge of the sheet vinyl. Apply only to one
side at a time to be seamed. Push in the edges of the sheet vinyl together while
the adhesive still has tack. Wipe any excess product with a warm wet cloth.
Roll the seam with a hand roller. Any dried sealer may be removed with mineral
spirits. Make sure the work area is protected for at least 6 hours, to allow the
seam to be cured.
Curing
Up to 6 hours. High temperature and low humidity will cause the adhesive to
cure faster.
Clean-up
Fresh adhesive – Use warm soapy water while wet.
Dried adhesive – use mineral spirits sparingly with a clean, white cotton cloth.
DO NOT POUR DIRECTLY ONTO FLOORING.
SUPERIOR
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com • A Quality Brand of Q.E.P. Co., Inc.