Use and Care Manual

72007200
1. PRODUCT NAME
ROBERTS
®
7200 BASE BOND
TM
Wall Base Adhesive
2. MANUFACTURER INFORMATION
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
ROBERTS
®
7200 BASE BOND is a superior-grade, solvent-free adhesive
specically designed for the interior installation of vinyl, rubber and carpet
wall base. The tenacious wet-suction formula makes it ideal for use over
porous wall surfaces such as gypsum drywall, brick, concrete block, wood,
properly cured plaster and concrete. VOC < 1 g/L.
Features and Benets
• Excellent holding power and great wet suction
• Fast set-up and non-staining formula
• Strong initial grab for holding wall base
• Outstanding plasticizer migration resistance
• Enviro-Friendly – solvent-free and LEED
®
compliant; VOC < 1 g/L,
SCAQMD Rule 1168
• CRI Green Label Plus
®
Certied – GLP #71129
• GoldGuard
®
antimicrobial product protection
Meets Environmental Standards
LEED
®
EQc 4.1
(100 g/L limit)
SCAQMD, Rule 1168
(100 g/L limit)
PASSES PASSES
Uses
For adhering vinyl, rubber and carpet wall base.
Coverage and Trowel Options*
Snozzle
Flooring: Wall base (4")
Coverage: 50-60 lineal feet per 30 oz
2.3 or 5-hole applicator nozzle
Coverage: 30-70 lineal feet per 30 oz
1/8" x 1/8" x 1/8"
Flooring: Wall Base (4")
Coverage: 70-80 sq. ft. per gallon
3/16" x 5/32"
Flooring: Wall Base (4")
Coverage: 120-150 lineal feet per gallon
*The trowel notches referenced are those typically recommended for the type of
ooring being installed and are shown as a guide. Consult ooring manufacturer
for their specic trowel recommendations.
Substrates
Porous wall surfaces such as gypsum drywall, brick, concrete block, wood,
properly cured plaster and concrete.
Limitations
• ROBERTS 7200 BASE BOND is not recommended over a non-porous surface
such as painted substrates or metal.
• For interior installations only.
• Concrete and plaster must be properly seasoned and dry prior
to installation.
• Ensure adequate ventilation during wall base installation.
• Refer to ROBERTS 7200 BASE BOND Safety Data Sheet,
www.robertsconsolidated.com, industry standards, and manufacturer’s
guidelines and specic recommendations prior to installation for
additional information.
4. TECHNICAL DATA
Product Type: Acrylic Polymer Paste
Color: Creamy Tan
Odor: Mild, sweet odor; odorless when dry
Open Time: Up to 10 minutes
Working Time: Up to 30 minutes
VOC: < 1 g/L
Shelf Life: 1 year in unopened container
Storage: Protect from freezing
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com
Wall Base Adhesive