SDS

2
SECTION 4: First-Aid Measures
Inhalation: Move victim to fresh air. Consult physician if necessary.
Skin Contact: Wash with soap and water. Remove contaminated clothing. Consult physician if necessary.
Eye Contact: Flush with copious amounts of water for at least 15 minutes. Consult physician if necessary.
Ingestion: Do not induce vomiting. Wash mouth with water. Consult physician.
Note to Physician: Eyes: Stain for evidence of corneal injury. If cornea is burned, instill antibiotic steroid preparation. Skin:
This compound is a known skin sensitizer. Treat symptomatically as for contact dermatitis or thermal burns.
If burned, treat as thermal burn. Ingestion: Treat symptomatically. There is no specific antidote. Inducing
vomiting is contraindicated because of the irritating nature of this compound. Respiratory: Treatment is
essentially symptomatic. Remove individual with symptoms from exposure and assist in breathing if
necessary.
SECTION 5: Fire-Fighting Measures
Extinguishing Media: This product is not flammable. Use fire- extinguishing media appropriate for surrounding materials.
Hazardous Combustion Products: No particular hazards known.
Protection of Firefighters: Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
SECTION 6: Accidental Release Measures
Personal Precautions: Use protective gloves, goggles and suitable protective clothing.
Environmental Precautions: Do not allow product to get into drains, soil, or surface water.
Methods of Clean-up: Small spillages: Absorb with sand or other inert absorbent. Large spillages: Dam and absorb.
Collect spillage in containers, seal securely and deliver for disposal according to local regulations. Wear
necessary protective equipment.
SECTION 7: Handling and Storage
Handling Precautions: Provide good ventilation. Do not use in confined spaces without adequate ventilation and/or respirator.
Avoid contact with skin and eyes. Do not eat, drink or smoke when using the product.
Storage: Keep separate from food, feedstuffs, fertilizers and other sensitive material. Store in closed original
container at temperatures between 5°Cand 30°C/ 40°F and 86°F. Protect from freezing and direct sunlight.
SECTION 8: Exposure Control / Personal Protection
Exposure Guidelines: Not determined
Engineering Controls: Provide adequate ventilation.
Personal Protective Equipment:
Skin Protection - Permeation resistant gloves (butyl rubber, nitrile rubber, PVC or polyvinyl alcohol).
Eye/Face Protection - Glasses with side shields, chemical splash goggles and/or face shield
Chemical Name / CAS No. OSHA Exposure Limits ACGIH Exposure Limits Other Exposure Limits
Naphthenic Oil/ 64742-52-5 Not Established Not Established Not Established
Urea/ 57-13-6 Not Established Not Established Not Established
SECTION 9: Physical and Chemical Properties
Appearance: Creamy Tan Paste
Vapor Density: 2.1
Odor: Mild Sweet Odor
Relative Density: 1.24
Odor Threshold: Not available