Installation Guide

2310
Resilient Flooring Adhesive
1. PRODUCT NAME
Roberts
®
2310 Resilient Flooring Adhesive
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
Roberts 2310 Resilient Flooring Adhesive is formulated with the desired tack
and flexible working time for fiberglass-backed sheet vinyl and luxury vinyl
tile; heterogeneous sheet vinyl and modular carpet.
Features and Benefits
• Ideal for fiberglass sheet vinyl and luxury vinyl tile
• Permanent or releasable installations
• Pressure sensitive; remains tacky
• Enviro-Friendly – solvent-free and LEED
®
compliant; VOC < 1 g/L,
SCAQMD Rule 1168
• CRI Green Label Plus
®
Certified – GLP #42613
• GoldGuard
®
antimicrobial product protection
• Traffic – Residential/Moderate Commercial
Uses
For adhering fiberglass-backed sheet vinyl, luxury vinyl tile (12" x 12") and
modular carpet (vinyl-back) in residential to light commercial applications.
Coverage and Trowel Options*
1/16" x 1/16" x 3/32"
Flooring: Fiberglass-Back Sheet Vinyl & Luxury Sheet Vinyl Tile
Coverage: 160-180 ft
2
per gallon
1/16" x 1/16" x 1/16"
Flooring: Fiberglass-Back Sheet Vinyl & Luxury Sheet Vinyl Tile
Coverage: 170-190 ft
2
per gallon
*The trowel notches referenced are those typically recommended for the type of
flooring being installed and are shown as a guide. Consult flooring manufacturer
for their specific trowel recommendations.
Substrates
Concrete, APA rated plywood and terrazzo.
Limitations
• Ensure substrate, flooring material and adhesive are fully acclimated
prior to installation at the same temperature and humidity level expected
during normal use (between 65°F-95°F with a relative humidity (RH) of no
greater than 65%).
• Ensure adequate ventilation during flooring installation.
• Refer to Safety Data Sheet, www.robertsconsolidated.com, industry
standards, and manufacturer’s guidelines and specific recommendations
prior to installation for additional information.
4. TECHNICAL DATA
Product Type:
Acrylic PSA
Color:
Beige
Odor:
Very mild, non-offensive
Open Time:
Up to 25 minutes (Permanent Installations)
Working Time:
Up to 45 minutes
Tack Time:
Approximately 50 minutes (Releasable Installations)
VOC:
< 1 g/L
MVER:
5 lbs. or less (ASTM F1869) / 80% RH or less (ASTM F2170)
pH:
Must not exceed 9.0
Shelf Life:
1 year in unopened container
Storage:
Protect from freezing. Does not require thinning.
SUPERIOR
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com • A Quality Brand of Q.E.P. Co., Inc.