Installation Guide

23102310
1. PRODUCT NAME
ROBERTS
®
2310 RESILIENT Fiberglass-Back Sheet Vinyl Adhesive
2. MANUFACTURER
Roberts Consolidated Industries, Inc.
300 Cross Plains Blvd
Dalton, GA 30721
[phone] / [phone]
3. DESCRIPTION
ROBERTS
®
2310 RESILIENT Fiberglass-Back Sheet Vinyl Adhesive is
formulated with the desired tack and exible working time to install berglass
sheet vinyl, small format luxury vinyl tile (up to 12” x 12”) and modular carpet
tiles in residential-to-light commercial applications. VOC: <1 g/L. For interior
use only.
Features and Benets
• Ideal for berglass-backed sheet vinyl
• Use with luxury vinyl tile (up to 12” x 12”)
• Permanent (wet-set) or releasable (full-tack) application methods
• Pressure sensitive; remains tacky
• Enviro-Friendly – solvent-free and LEED
®
compliant; VOC < 1 g/L,
SCAQMD Rule 1168
• CRI Green Label Plus
®
Certied – GLP #42613
• GoldGuard
®
antimicrobial product protection
• Trafc – Residential/Light Commercial
Meets Environmental Standards
LEED
®
EQc 4.1
(100 g/L limit)
SCAQMD, Rule 1168
(100 g/L limit)
PASSES PASSES
Uses
For adhering berglass-backed sheet vinyl, luxury vinyl tile (12" x 12") and
modular carpet (vinyl-backed) in residential-to-light commercial applications.
Coverage and Trowel Options*
1/16" x 1/16" x 3/32"
Flooring: Fiberglass-Backed Sheet Vinyl & Luxury
Vinyl Tile
Coverage: 160-180 ft
2
per gallon
1/16" x 1/16" x 1/16"
Flooring: Fiberglass-Backed Sheet Vinyl & Luxury
Vinyl Tile
Coverage: 125-185 ft
2
per gallon
1/16" x 1/32" x 1/32"
Flooring: Fiberglas Sheet Vinyl and Modular Carpet Tile
Coverage: 220-240 ft
2
per gallon
*The trowel notches referenced are those typically recommended for the type of
ooring being installed and are shown as a guide. Consult ooring manufacturer
for their specic trowel recommendations.
Substrates
Concrete, APA rated plywood and terrazzo.
Limitations
• Ensure adequate ventilation during ooring installation.
• Interior controlled environments
• Refer to Safety Data Sheet, www.robertsconsolidated.com, industry
standards, and manufacturer’s guidelines and specic recommendations
prior to installation for additional information.
PRESSURE SENSITIVE
Roberts Consolidated Industries, Inc. • www.robertsconsolidated.com
Fiberglass-Back Sheet Vinyl Adhesive
RESILIENT