Specification

SECTION 8: Exposure Control / Personal Protection
Exposure Guidelines: Not determined
Engineering Controls: Provide adequate ventilation.
Personal Protective Equipment:
Skin Protection - Permeation resistant gloves (butyl rubber, nitrile rubber, PVC or polyvinyl alcohol).
Eye/Face Protection - Glasses with side shields, chemical splash goggles and/or face shield.
Chemical Name / CAS No.
OSHA Exposure Limits
ACGIH Exposure Limits
Other Exposure Limits
Naphthenic Oil/64742-52-5
Not Established
Not Established
Not Established
Urea/ 57-13-6
Not Established
Not Established
Not Established
SECTION 9: Physical and Chemical Properties
Appearance: Creamy tan paste
Odor: Very mild, non- offensive odor
Relative Density: 1.0
Odor Threshold: Not available
Solubility: Miscible in water
pH: 8.65
Partition Coefficient: n-octanol/water; Not determined
Melting Point: Not determined
Freezing Point: Not determined
Auto-ignition Temperature: Not determined
Flash Point: Non- flammable > 204 C (400 F) Cleveland Closed Cup
Decomposition Temperature: Not determined
Evaporation Rate: Not determined
Viscosity: Not determined
Flammability (Solid/Gas): Not applicable
Upper/Lower Flammability: Not determined
VOC Content: <1 g/L
Vapor Pressure: Not Determined
Boiling Point: 100°C/ 212°F
SECTION 10: Stability and Reactivity
Chemical Stability: Stable under normal temperature conditions and recommended use.
Conditions to Avoid: Excessive heat, direct sunlight and/or frost.
Materials to Avoid: None.
SECTION 11: Toxicological Information
Mixture Toxicity: LC50: 36mg/L
Acute toxicity:
Ingestion: Not determined
Inhalation: Not determined
Skin Contact: Not determined
SECTION 12: Ecological Information
Mobility and Bioaccumulation Potential: Not determined