Specification

Safety Data Sheet
Revision Date: 06/24/2016
SECTION 1: Identification and Company Details
Product Name: 2057 Vinyl Composition Tile Adhesive
Product Code: 2057
Manufacturer/ Supplier: Roberts Consolidated Industries, Inc.
Address: 300 Cross Plains Blvd.
Dalton, GA 30721
Emergency Phone: [phone] (24-hour Response / CHEMTREC)
Product Information: [phone]
Recommended Use: Adhesive
SECTION 2: Hazard(s) Identification
Classification of the
substance or mixture: This product is not classified as hazardous under GHS criteria.
SECTION 3: Composition / Information on Ingredients
Weight % CAS #
Naphthenic Oil
20.00%
64742-52-5
Urea
2.00%
57-13-6
SECTION 4: First-Aid Measures
Inhalation: Move victim to fresh air. Consult physician if necessary.
Skin Contact: Wash with soap and water. Remove contaminated clothing. Consult physician if necessary.
Eye Contact: Flush with copious amounts of water for at least 15 minutes. Consult physician if necessary.
Ingestion: Do not induce vomiting. Wash mouth with water. Consult physician.
Note to Physician: Eyes: Stain for evidence of corneal injury. If cornea is burned, instill antibiotic steroid preparation. Skin:
Treat symptomatically as for contact dermatitis or thermal burns. If burned, treat as thermal burn.
Ingestion: Treat symptomatically. There is no specific antidote. Inducing vomiting is contraindicated
because of the irritating nature of this compound. Respiratory: Treatment is essentially symptomatic.
Remove individual with symptoms from exposure and assist in breathing if necessary.
SECTION 5: Fire-Fighting Measures
Extinguishing Media: This product is not flammable. Use fire- extinguishing media appropriate for surrounding materials.
Hazardous Combustion Products: No particular hazards known.
Protection of Firefighters: Firefighters should be equipped with self-contained breathing apparatus and turn-out gear.
SECTION 6: Accidental Release Measures
Personal Precautions: Use protective gloves, goggles and suitable protective clothing.
Environmental Precautions: Do not allow product to get into drains, soil, or surface water.
Methods of Clean-up: Small Spillages: Absorb with sand or other inert absorbent. Large Spillages: Dam and absorb spillages.
Collect spillage in containers, seal securely and deliver for disposal according to local regulations. Wear
necessary protective equipment.
SECTION 7: Handling and Storage
Handling Precautions: Provide good ventilation. Do not use in confined spaces without adequate ventilation and/or respirator.
Avoid contact with skin and eyes. Do not eat, drink or smoke when using the product.
Storage: Keep separate from food, feedstuffs, fertilizers and other sensitive material. Store in closed original container
at temperatures between 5°Cand 30°C/ 40°F and 86°F. Protect from freezing and direct sunlight.