MSDS

Page 5 of 5
Health: 1
Flammability: 0
Physical hazards: 0
Protection: B
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on MSDSs under 29 CFR
1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented
HMIS® program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS®
materials may be purchased exclusively from J. J. Keller [phone].
The customer is responsible for determining the PPE code for this material.
Prepared by Roberts Product Safety & Regulatory Compliance Group, [phone].
Date of issue: 04/25/2011.
THE INFORMATION HEREIN IS GIVEN IN GOOD FAITH, BUT NO WARRANTY EXPRESSED OR IMPLIED IS MADE. ROBERTS URGES USERS
OF THIS PRODUCT TO EVALUATE ITS SUITABILITY AND COMPLIANCE WITH LOCAL REGULATIONS AS ROBERTS CANNOT FORESEE THE
FINAL USE OF THE PRODUCT, NOR THE FINAL LOCATION OF USAGE.