Specification

Quality & Excellence Since 1938.
www.ROBERTSCONSOLIDATED.com
U.S. Headquarters
866 435 8665
Canada
800 840 9422
Europe/Middle East
0031 24 6485348
Australia
011 61 3 9797 1888
New Zealand
64 9 415 9700
Longneck Plus 6" Jamb Saw
with dust containment system
10-56
The 10-56 Longneck Plus 6” Jamb Saw has a unique 1-1/2" vacuum port
for dust containment plus a large back plate for extra stability. The 1100
watt, 8000 RPMS industrial grade motor provides the necessary power
for any job. This jamb saw is also equipped with a 6-3/16 inch, 36-tooth
carbide tip blade designed to easily cut door jambs, trim and molding for
installation of new floors. Also included is a high performance masonry
blade that easily cuts through brick and cement block.
The Longneck Plus is equipped with an adjustable cutting depth guide to prevent cutting into plaster or wall board
when trimming and the cutting height is adjustable from flush to 1-1/16 inch. It’s designed to cut full inside corners
in molding up to 1/2 inch thick and doors as thick as 1-3/4 inches can be undercut without removing. Includes a
custom molded carrying case with metal clips for storage and portability.
2 BLADES
Includes 36-tooth carbide tip blade ( Roberts 10-47-2 )
and Masonry Blade(
Roberts 10-55-24 ).
Also Available: 20-tooth blade (
Roberts 10-47-6 )
DURABLE
Custom molded carrying
case with metal clips
F1014-8642
VERSATILE
Blade height adjusts
from “flush” to 1-1/16"
PRECISION
Large 6-3/16" blade with cupped
arbor for precise flush cuts
VOLTAGE
AMPS
WATTS
RPM
ARBOR
120V-60Hz
9.6 (Industrial Grade)
1100
8000
5/8"
SPECIFICATIONS
COMFORT
Extended rotating “tail”
for maximum comfort &
leverage against torque
SAFETY
Extended blade guard
lever for added safety
VARIABLE
Cuts under toe
kicks and full inside
corners in molding
up to 1/2" thick
POWERFUL
1100 watt industrial grade power unit
CONVENIENT
1-1/2" vacuum port for
optimal dust containment
ACCURATE
Adjustable cutting depth
guide prevents cutting into
plaster or wall board when
trimming baseboards
O
N
OFF