FM RDS/DAB Digital Radio User Manual

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

Operating your radio - FM

1. Carefully extend the telescopic aerial.

2. Press the

On/Off button to switch on your radio. The display will show

"Roberts" for a few seconds.

3. Press the

Band button to select the FM band.

4. Press and release the

Select button until the display shows "Auto

tune <>".

5. Press the

Tuning Up button your radio will scan in an upwards

direction (low frequency to high frequency) and stop automatically

when it nds a station of sufcient strength.

6. After a few seconds the display will update and show station name

(if RDS information is available).

7. Press the

Tuning Down button to scan the FM band in a downwards

direction (high frequency to low frequency).

8. When the waveband end is reached your radio will recommence tuning

from the opposite waveband end.

9. Adjust the

Volume control to the required setting.

10. To switch off your radio press the

On/Off button.