Service manual

SECTION 9: REPLACEMENT PARTS AND ACCESSORIES

Use only genuine ROBERTS GORDON

replacement parts.

Use of parts not specified by Roberts-Gordon voids warranty.

Failure to follow these instructions can result in property damage.

9.1 Replacement Parts

9.2 Accessories

Pump Boot

6" (15 cm)

Band Clamp

6" (15 cm)

Pressure Switch

Motor

Pump Boot

4" or 6"

(10 or 15 cm)

Band Clamp

4" or 6"

(10 or 15 cm)

Adapter

4" to 6"

(10 to15 cm)

for 4" (10 cm)

tailpipe only

Description Part Number Description Part Number

Motor 2 HP, 230 V, 1 Ø 90605102 Isolator Pads T00680

Motor 2 HP, 208 V - 230 V/460 V, 3 Ø 90605103 4" (10 cm) Pump Boot 91412800

Impeller Assembly, 340 mm dia. 90713340 6" (15 cm) Pump Boot 91412802

4" (10 cm) Band Clamp 91901300 Mounting Angle 01365000

6" (15 cm) Band Clamp 91913703 Adapter 6" x 4" (15 cm x 10 cm) 02719903

Pressure Switch 90430600

Description Part Number Description Part Number

Contactor Package (for EP-301) 10050009 4" Coated Cross 0133092D

Starter Package (for EP-303) 10050010 4" Aluminized 90° Elbow 01335801

4" Plain Coupling 01312700 6" Aluminized 90° Elbow T0100320

6" Plain Coupling 01312706 4" Coated 90° Elbow 0133580D

4" Lined Coupling 0131270I 4" Aluminized Non Heat Treated 10’ Tube 91409403

4" Damper Coupling 01331900 6" Aluminized Non Heat Treated 10’ Tube 91409420

6" Damper Coupling E0009356 4" Coated 10’ Tube 9141030D

4" Aluminized Tee 01330203 Aluminized Tube adapter (6" dia. x 4" dia.) 91418200

6" Aluminized Tee 01330204 6" Tube Hangar 91240010

4" Coated Tee 0133022D 4" Drain Cap 02718851

4" Aluminized Cross 01330903 6" Drain Cap 02718852

6" Aluminized Cross 01330904 Condensate Valve Assembly 01327001