Service manual

6
Pump Assembly Instructions
Motor Shaft Seal
(P/N 02757500)
Motor
(P/N 90604600)
Pump Frame
Motor Shaft Hub
Impeller
(P/N 02791601)
Inlet Plate Assembly
(P/N 02724200)
Pump Scroll
(P/N 02757001)
Disconnect electrical power before installation or service.
Failure to follow these instructions can result in death, injury
or property damage.
WARNING
Figure 5
Step 4
The Motor Shaft Seal (P/N 02757500) eliminates air leakage around
the motor shaft and reduces the associated noise. Install the motor
shaft seal as follows:
a. Separate the motor shaft seal at the pre-cut score line.
b. Wrap the shaft seal around the motor shaft hub as shown above.
c. Secure the shaft seal in position with the adhesive strip provided.
EP-100 PUMP INSTALLATION, OPERATION AND SERVICE MANUAL