Service manual

9
Wall Mounting Platform - Angle Assembly
The alternate method of mounting the EP-100 vacuum pump is on an outside wall and
venting directly through the wall. The optional Mounting Angle Package P/N 01312102 must
be ordered if this method is used.
(P/N 92113900)
Hex Nut
(P/N 96411600)
Spring Lock Washer
(P/N 95211600)
Flat Washer
(P/N 93413912)
Hex Head Screw
#5/16-18 X 3/4
(P/N 95211600)
Flat Washer
(P/N 01365000)
Mounting
Angle
Figure 8
Pump Mounting Instructions
SECTION 4: MOTOR WIRING