Service manual

SECTION 5: PUMP I NSTALLATION
7
5.1.3 Attaching the Pump Inlet Assembly
From the scroll assembly side of the pump, orient the
inlet assembly so the threaded pipe coupling is on
the top. See partial end view on Page 7, Figure 3.
• Attach inlet assembly onto the scroll assembly by
using the #10 - 24 Keps locknuts provided.
FIGURE 3: Pump Assembly
Pump Inlet Assembly
Impeller
Pump Scroll
Partial End View
Rubber
Mounts
#10-24 Keps Locknuts - 12 Required
1/8" NPT
Pipe Coupling
Description Part Number
Rubber Mounts 91906100
Pump Scroll 02757001
Pump Inlet Assembly 02724200