Service manual

EP-100 PUMP INSTALLATION, OPERATION AND SERVICE MANUAL
14 of 29
7.2 Wall Mounting
7.2.1 Wall Mounting Platform
The alternative method of mounting the pump is on
an outside wall and venting directly through the wall.
The optional mounting angle package
(P/N 01312102) must be ordered if this method is
used.
The pump may be mounted by using mounting
angles as shown on Page 14, Figure 11 and Page
15, Figure 12. The two mounting angles form a
mounting platform to which the pump will be
attached.
Fix the mounting frame to the wall using anchors.
Select an anchor that will give equal to or greater
than 2000 lbs ultimate pull-out strength.
FIGURE 11: Wall Bracket Assembly
Mounting
Angle
Hex Head Bolt
Flat Washer
Lockwasher
Hex Nut
Flat Washer
Description Part Number
Mounting Angle Package 01312102
Mounting Angle 01365000
Hex Bolt 5/16" x 3/4" 93413912
Flat Washer 95211600
Lockwasher 96411600
Hex Nut 92113900