Service manual

SECTION 5: PUMP I NSTALLATION
11 o f 29
5.1.5 Installing the Motor Shaft Seal
The motor shaft seal (P/N 02757500) eliminates air
leakage around the motor shaft and reduces the
associated noise. Install the shaft seal as follows:
1. Separate the motor shaft seal at the pre-cut
score line.
2. Wrap the shaft seal around the motor shaft hub
as shown.
3. Secure the shaft seal in position with the
adhesive strip provided.
FIGURE 6: Motor Shaft Seal Installation
Motor Shaft Seal
EP-100 Motor
Pump Frame
Motor Shaft Hub
Impeller
Pump Inlet Assembly
Pump Scroll
Description Part Number
EP-100 Motor 90604600
Motor Shaft Seal 02757500
Pump Scroll 02757001
Impeller 02791601
Inlet Plate Assembly 02724200