Service manual

SECTION 5: PUMP I NSTALLATION
7 of 29
SECTION 5: PUMP INSTALLATION
5.1 Pump Assembly Instructions
5.1.1 Determine Orientation of Pump Discharge
To e n s ure your safety and comply with the terms of
the warranty, all units must be installed in
accordance with these instructions.
The pump must be installed in a location that it is
readily accessible for servicing.
An arrow is affixed to the outside of the pump scroll to
indicate the direction of rotation of the impeller.
The standard rotation of the impeller is in the
counterclockwise direction.
Pump discharge orientation is viewed from the rear of
the motor as shown on Page 8, Figure 3. Note that
the pump scroll outlet must always be positioned at
the bottom horizontal position.
WARNING
Severe Injury Hazard
Secure pump to tube.
Hang pump with materials with a minimum
working load of 750 lbs (340 kg).
Failure to follow these instructions can result
in death, injury or property damage.
WARNING
Cut/Pinch Hazard
Wear protective gear during installation,
operation and service.
Edges are sharp.
Failure to follow these instructions can result
in injury.