Service manual

SECTION 7: OPTIONAL HEATER ACCESSORIES
29
7.6 One-Foot Decorative Grille Installation
Step 7.6.1 One-Foot Decorative Grille Bracket
Step 7.6.2 Decorative Grille
Step 7.6.3 Joint Piece and Reinforcement
#8 Sheet Metal Screws
Cut relief notches for
supports and hangers.
Decorative Grille Bracket
2" (51 mm)
Minimum
Bracket
Overlap
Description Part Number
Bracket 01363003
In order to maintain reflector shape, do
not fasten brackets together. Do not
fasten bracket to adjoining reflectors.
Maintain same slipjoint position as
reflectors.
Spread apart brackets
and install
Decorative Grille.
Description Part Number
Decorative Grille 8’ x 1’ 91406700
#8 Sheet Metal Screws
Joint Piece
Reinforcement
Slip joint piece into
support bracket
and fasten to
bracket on one side
of the joint only.
Joint Piece
Description Part Number
Joint Piece 01365903
Reinforcement 01365902