Instructions / Assembly
EC1182C/EC1183C
ASSEMBLY & INSTALLATION INSTRUCTIONS
Components List
Note: (1). The above diagram illustrates the installation of your new light fixture. This is a representative drawing
and may not match the style of your light fixture.
1. Carefully unpack fixture from the carton. Take the parts out of the package and lay all the fixture components in a
clean and flat surface.
2. Attach Canopy Mounting Screws (a) to the Mounting Bracket (B) with screws facing outward. Attach Mounting Bracket
(B) to the outlet box with Long Screws (b) (not included). Note: The side of mounting plate marked “GND” must face out.
3. Connect the GROUND WIRE from the fixture and canopy to junction box, secure the electrical connections using the
Wire Connector (A). Connect the NEUTRAL (OR WHITE) WIRE from the fixture to NEUTRAL WIRE from power supply
with the Wire Connector (A). Connect the HOT (OR BLACK) WIRE from fixture to HOT WIRE from power supply with the
Wire Connector (A). Tuck wires neatly back into the outlet box.
4. Mount Fixture Body (C) on to the Mounting Bracket by lifting it on to the screws facing outward. Tighten and secure in
place with Barrel Knobs (c).
5. Screw Bulb (not included) (D) into the lamp socket. Do not exceed the maximum wattage specified on the fixture’s
wattage rating label. MAXIMUM 60 Watts.
6. Install Glass (E) onto the Fixture Body (C) by threading glass onto the Fixture Body (C).
Outlet box
A
a
b
c
C
D
B
E
Hardware List
c
2
Barrel Knobs
A
Item Description Quantity Item Description Quantity
Item Description QuantityItem Description Quantity
Bulb (Not Included)
Glass
Fixture Body
Long Screws (not included)
3
2
2
B
C
D
E
a
b
1
1
3
3
Wire Connector
Canopy Mounting Screws
Mounting Bracket
ASSEMBLY & INSTALLATION
WARNING
TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO TURN OFF MAIN POWER PRIOR
TO INSTALLATION.
CAUTION
Refer to the wattage caution label located near the socket for maximum wattage rating. Do not exceed
maximum rated wattage.
5017369