Instructions / Assembly

EC1176C/EC1177C

ASSEMBLY & INSTALLATION INSTRUCTIONS

Components List

Note: (1). The above diagram illustrates the installation of your new light fixture. This is a representative drawing

and may not match the style of your light fixture.

Outlet box

Hardware List

Barrel Knobs

Item Description Quantity Item Description Quantity

Item Description QuantityItem Description Quantity

Bulb (Not Included)

Glass

Socket Collar

Fixture Body

Long Screws (not included)

Wire Connector

Canopy Mounting Screws

Mounting Bracket

1. Carefully unpack fixture from the carton. Take the parts out of the package and lay all the fixture components in a

clean and flat surface.

2. Attached Canopy Mounting Screws (a) to the Mounting Bracket (B) with screws facing outward. Attach Mounting

Bracket (B) to the outlet box with Long Screws (b) (not included). Note: The side of mounting plate marked “GND” must

face out.

3. Connect the GROUND WIRE from the fixture and canopy to junction box, secure the electrical connections using the

Wire Connector (A). Connect the NEUTRAL (OR WHITE) WIRE from the fixture to NEUTRAL WIRE from power supply

with the Wire Connector (A). Connect the HOT (OR BLACK) WIRE from fixture to HOT WIRE from power supply with the

Wire Connector (A). Tuck wires neatly back into the outlet box.

4. Mount Fixture Body (C) on to the Mounting Bracket (B) by lifting it onto the screws facing outward, then tighten and

secure in place with Barrel Knobs (c).

5. Install Glass (D) onto the Fixture Body (C) and tighten the Glass (D) using the Socket Collar (E).

6. Screw Bulb (not included) (F) into the lamp socket. Do not exceed the maximum wattage specified on the fixture’s

wattage rating label. MAXIMUM 100 Watts.

ASSEMBLY & INSTALLATION

WARNING

TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO TURN OFF MAIN POWER PRIOR

TO INSTALLATION.

CAUTION

Refer to the wattage caution label located near the socket for maximum rated wattage. Do not exceed

maximum wattage.

5017369