Instructions / Assembly

All Thread Stem

EC1164C/EC1165C

ASSEMBLY & INSTALLATION INSTRUCTIONS

Components List

Note: (1). The above diagram illustrates the installation of your new light fixture. This is a representative drawing

and may not match the style of your light fixture.

Hardware List

Barrel Knob

Item Description Quantity Item Description Quantity

Item Description QuantityItem Description Quantity

Bulb (Not Included)

Glass

Socket Collar

Fixture Body

Long Screws (not included)

Wire Connector

Mounting Bracket

1. Carefully unpack fixture from the carton. Take the parts out of package and lay all the fixture components in a clean

and flat surface.

2. Install All Thread Stem and lock nuts (a) into the Mounting Bracket (B). Attach the Mounting Bracket (B) to outlet box

with Long Screws (b) (not included).

Note: The side of mounting plate marked “GND” must face out.

3. Connect the GROUND WIRE from the fixture and canopy to junction box, secure the electrical connections using the

Wire Connector (A). Connect the NEUTRAL (OR WHITE) WIRE from the fixture to NEUTRAL WIRE from power supply

with the Wire Connector (A). Connect the HOT (OR BLACK) WIRE from fixture to HOT WIRE from power supply with the

Wire Connector (A). Tuck wires neatly back into the outlet box.

4. Mount Fixture Body (C) on to the Mounting Bracket and over the protruding All Thread Stem (a). Adjust fixture body

and secure in place using Barrel Knob (c).

5. Install Glass (D) onto the Fixture Body (C) and tighten the Glass (D) using the Socket Collar (E).

6. Screw Bulb (not included) (F) into the lamp socket. Do not exceed the maximum wattage specified on the fixture’s

wattage rating label. MAXIMUM 100 Watts.

ASSEMBLY & INSTALLATION

WARNING

TO AVOID THE RISK OF ELECTRICAL SHOCK, BE SURE TO TURN OFF MAIN POWER PRIOR

TO INSTALLATION.

CAUTION

Refer to the wattage caution label located near the socket for recommended maximum wattage. Do not exceed

maximum wattage.

5017369

Outlet box