User's Manual

Practical Tips, Emergency Service 231
License Plate Light
Changing bulb
1. Unscrew both screws A and remove the lens.
2. Remove defective bulb from between the
contact springs and replace it.
3. Reassemble in reverse order.
Check operation of the light.
Luggage Compartment/Engine
Compartment/Footwell Light
Changing bulb
1. With a screwdriver (arrow), carefully push out
the light.
2. Remove defective bulb from between the
contact springs and replace.
3. Insert the light into the cut-out, first from one
side then from the other. Check operation.
Door Guard/Curb Light
Changing bulb
1. With a screwdriver (arrow), carefully push out
the light.
2. Pull bulb holder out of light housing. Remove
defective bulb and replace.
3. Install bulb holder and insert light.