Home Security System User Manual
Table Of Contents
- 1 Getting Started 3
- 2 On-Screen Display Menu Navigation 7
- 3 Common AutoDome User Commands (unlocked) 27
- 4 Alternative Control Protocols 29
- 5 Pelco On-Screen Menus 33
- 6 Keyboard Commands by Number 37
- 7 Advanced Features 41
- 7.1 Alarm Rules (300 and 500i Series Only) 41
- 7.2 AutoTrack Operation (500i Series Only) 45
- 7.2.1 AutoTrack Settings and Recommendations 45
- 7.2.2 AutoTrack Optimization 46
- 7.3 Virtual Masking (500i Series Only) 47
- 7.4 Privacy Masking (300 and 500i Series Only) 47
- 7.5 Motion Detection with Region of Interest (500i Series Only) (Preset positions 90 through 99) 48
- 7.6 Image Stabilization (500i Series Only) 48
- 7.7 Pre-position Tour 48
- 8 Configuring and Using the IP AutoDome 49
- 8.1 Overview of Features 49
- 8.2 System Requirements 50
- 8.3 Connecting the IP AutoDome to the PC 50
- 8.4 Configuring the IP AutoDome Camera 51
- 8.5 Installing the Required Software 52
- 8.5.1 Changing the Network Settings 55
- 8.6 Main Screen 57
- 8.7 Viewing Live Images and Controlling the AutoDome PTZ 58
- 8.7.1 Establishing a Connection 58
- 8.7.2 Configuring Data Streams 58
- 8.7.3 Controlling Camera Operations 59
- 8.7.4 Entering a Keyboard Control Command 60
- 8.8 Alarm Connections 62
- 8.8.1 Sending an Alarm E-mail 63
- 8.9 Partitioning 64
- 8.9.1 Viewing the Partition Status 68
- 8.9.2 Editing a Partition 70
- 8.9.3 Deleting Recordings 71
- 8.9.4 Deleting all Partitions 71
- 8.10 Recording Scheduler 71
- 8.10.1 Holidays 72
- 8.10.2 Deleting Holidays 72
- 8.10.3 Time Periods 72
- 8.10.4 Activating the Recording 73
- 8.10.5 Recording Status 73
- 8.11 Recording Profiles 73
- 8.12 Alarm Rules 74
- 8.12.1 Creating Alarm Rules 75
- 8.12.2 Alarm Rule Examples 76
- 9 VG4 Audio Connections 81
- 10 Troubleshooting Guide 85
- 1 Getting Started
- 2 On-Screen Display Menu Navigation
- 3 Common AutoDome User Commands (unlocked)
- 4 Alternative Control Protocols
- 5 Pelco On-Screen Menus
- 6 Keyboard Commands by Number
- 7 Advanced Features
- 8 Configuring and Using the IP AutoDome
- 9 VG4 Audio Connections
- 10 Troubleshooting Guide
VG4 AutoDome Modular Camera System | en 93
Bosch Security Systems, Inc. User’s Manual F.01U.089.433 | 4.0 | 2008.09
A User Command Table
Function
Key
Comm
No.
Command Description Series
200
Series
300
Serie
s 500i
On/Off 1 Scan 360° Autopan without limits
On/Off 2 Autopan Autopan between limits
On/Off 7 Play Custom Pre-
position Tour
Activate/Deactivate
On/Off 8 Play Pre-position Tour Activate/Deactivate
On/Off 14 Set Autopan and Scan
Speed
Enters speed adjustment slide bar
On/Off 15 Set Pre-position Tour
Period (dwell)
Enters dwell adjustment slide bar
On/Off 20 Backlight Comp Backlight Compensation
On/Off 24 Stabilization Electronic Stabilization
On/Off 26 Wide Dynamic Range
(WDR camera only)
Activate/Deactivate
On 47 View Factory Settings View all menu default settings
On/Off 50 Playback A, continuous Activate/Deactivate
On/Off 51 Playback A, single Activate/Deactivate
On/Off 52 Playback B, continuous Activate/Deactivate
On/Off 53 Playback B, single Activate/Deactivate
On/Off 56 Night Mode menu On, Off, Auto (Day/Night only)
On/Off 57 Night Mode setting Enables/Disables Night Mode (Day/Night
only)
On 62 Pre-position Title menu Enters Pre-position Title menu
On 64 Alarm Status Enters Alarm Status menu
Off 65 Alarm Acknowledge Acknowledge alarm or deactivate physical
outputs
On 66 Display software version Displays software version number
On 72 Re-initialize camera Performs camera/lens re-initialization
functions
On/Off 78 AutoTrack Turns AutoTrack on or off
On/Off 81 Physical output 1 On–activates output
Off–deactivates output
On/Off 82 Physical Output 2 On–activates output
Off–deactivates output
On/Off 83 Physical Output 3 On–activates output
Off–deactivates output
On/Off 90 Command Lock/Unlock On–lock on
Off–lock off
On/Off 100 Record A Activate/Deactivate
On/Off 101 Record B Activate/Deactivate
On 997 FastAddress, display Display current address