Home Security System User Manual

72 en | Configuring and Using the IP AutoDome VG4 AutoDome Modular Camera System
F.01U.089.433 | 4.0 | 2008.09 User’s Manual Bosch Security Systems, Inc.
To edit the Recording Scheduler, do the following:
1. Open the IP AutoDome Livepage, then click the Settings tab.
2. Click the Recording Settings link, then click Recording Scheduler. The IP AutoDome
displays the Recording Scheduler screen (see Figure 8.30).
3. Click the profile you want to link in the Time periods field.
4. Click in a field in the table, hold down the mouse button and drag the cursor over all the
periods to assign the selected profile.
5. Use the right mouse button to deselect any of the intervals.
6. Click the Select all button to link all time intervals to the selected profile.
7. Click the Clear all button to deselect all of the intervals.
8. Click the Set button to save the settings in the unit, then click Start.
8.10.1 Holidays
You can define holidays that are not in the standard weekly schedule on which recordings are
to apply. This feature allows you to apply a schedule for Sundays to other days with dates that
fall on varying weekdays.
1. Click the Holidays tab (see Figure 8.30). Any days that have already been selected will be
shown in the table.
2. Click the Add button, the IP AutoDome displays the Add holiday screen.
Figure 8.31 Adding a Holiday
3. Select the desired date from the calendar. To select several consecutive calendar days,
click and drag the mouse over the days. The Recording scheduler displays these days as a
single entry in the table.
4. Click OK to accept the selection. The IP AutoDome closes the window.
5. Assign the individual holidays to the recording profiles, as described in Figure 8.32.
8.10.2 Deleting Holidays
To delete holidays which have been defined by yourself, do the following:
1. Click the Delete button. The Recording scheduler opens a new window.
2. Click the date you would like to delete.
3. Click OK to delete the item from the table. The IP AutoDome closes the window.
4. Repeat this process for deleting additional days.
8.10.3 Time Periods
To change the names of the recording profiles, do the following:
1. Click a profile, and then the Rename button.
2. Enter your chosen name and click the Rename button again.