Home Security System User Manual
Table Of Contents
- 1 Getting Started 3
- 2 On-Screen Display Menu Navigation 7
- 3 Common AutoDome User Commands (unlocked) 27
- 4 Alternative Control Protocols 29
- 5 Pelco On-Screen Menus 33
- 6 Keyboard Commands by Number 37
- 7 Advanced Features 41
- 7.1 Alarm Rules (300 and 500i Series Only) 41
- 7.2 AutoTrack Operation (500i Series Only) 45
- 7.2.1 AutoTrack Settings and Recommendations 45
- 7.2.2 AutoTrack Optimization 46
- 7.3 Virtual Masking (500i Series Only) 47
- 7.4 Privacy Masking (300 and 500i Series Only) 47
- 7.5 Motion Detection with Region of Interest (500i Series Only) (Preset positions 90 through 99) 48
- 7.6 Image Stabilization (500i Series Only) 48
- 7.7 Pre-position Tour 48
- 8 Configuring and Using the IP AutoDome 49
- 8.1 Overview of Features 49
- 8.2 System Requirements 50
- 8.3 Connecting the IP AutoDome to the PC 50
- 8.4 Configuring the IP AutoDome Camera 51
- 8.5 Installing the Required Software 52
- 8.5.1 Changing the Network Settings 55
- 8.6 Main Screen 57
- 8.7 Viewing Live Images and Controlling the AutoDome PTZ 58
- 8.7.1 Establishing a Connection 58
- 8.7.2 Configuring Data Streams 58
- 8.7.3 Controlling Camera Operations 59
- 8.7.4 Entering a Keyboard Control Command 60
- 8.8 Alarm Connections 62
- 8.8.1 Sending an Alarm E-mail 63
- 8.9 Partitioning 64
- 8.9.1 Viewing the Partition Status 68
- 8.9.2 Editing a Partition 70
- 8.9.3 Deleting Recordings 71
- 8.9.4 Deleting all Partitions 71
- 8.10 Recording Scheduler 71
- 8.10.1 Holidays 72
- 8.10.2 Deleting Holidays 72
- 8.10.3 Time Periods 72
- 8.10.4 Activating the Recording 73
- 8.10.5 Recording Status 73
- 8.11 Recording Profiles 73
- 8.12 Alarm Rules 74
- 8.12.1 Creating Alarm Rules 75
- 8.12.2 Alarm Rule Examples 76
- 9 VG4 Audio Connections 81
- 10 Troubleshooting Guide 85
- 1 Getting Started
- 2 On-Screen Display Menu Navigation
- 3 Common AutoDome User Commands (unlocked)
- 4 Alternative Control Protocols
- 5 Pelco On-Screen Menus
- 6 Keyboard Commands by Number
- 7 Advanced Features
- 8 Configuring and Using the IP AutoDome
- 9 VG4 Audio Connections
- 10 Troubleshooting Guide
38 en | Keyboard Commands by Number VG4 AutoDome Modular Camera System
F.01U.089.433 | 4.0 | 2008.09 User’s Manual Bosch Security Systems, Inc.
On/Off 58 Day/Night Threshold On–menu (Day/Night only)
On/Off 60 On Screen Display On–enable
Off–disable
On 61 Display Adjust Adjust On-screen Display
On 62 Pre-position Title menu Enters Pre-position Title menu
On 63 Zone Title menu Enters Zone Title menu
On 64 Alarm Status Enters Alarm Status menu
Off 65 Alarm Acknowledge Acknowledge alarm or deactivate
physical outputs
On 66 Display software version Displays software version
number
On 72 Re-initialize camera Performs camera/lens re-
initialization functions
On/Off 78 AutoTrack Turns AutoTrack on or off
On 79 Camera Height Enters the Camera Height menu
On/Off 80 Digital Zoom Lock Turns digital zoom on and off
On/Off 81 Physical output 1 On–activates output
Off–deactivates output
On/Off 82 Physical Output 2 On–activates output
Off–deactivates output
On/Off 83 Physical Output 3 On–activates output
Off–deactivates output
On/Off 84 Physical Output 4 On–activates output
Off–deactivates output
On/Off 86 Sector Blanking Enters Sector Blanking menu
On/Off 87 Privacy Masking Enters Privacy Masking menu
On/Off 90 Command Lock/Unlock On–lock on
Off–lock off
On/Off 91 Lens Polarity menu On–reverse
Off–normal
On/Off 92 Lens Polarity menu On–reverse
Off–normal
On/Off 93 Lens Polarity menu On–reverse
Off–normal
On/Off 100 Record A Activate/Deactivate
On/Off 101 Record B Activate/Deactivate
On 997 FastAddress, display Display current address
On 998 FastAddress, all units Display and program current
address
On 999 FastAddress,
unaddressed domes
Display and program
unaddressed AutoDomes
Locked
Function
Key
Comm
No.
Command Description Series
200
Series
300
Series
500i