Home Security System User Manual
Table Of Contents
- 1 Getting Started 3
- 2 On-Screen Display Menu Navigation 7
- 3 Common AutoDome User Commands (unlocked) 27
- 4 Alternative Control Protocols 29
- 5 Pelco On-Screen Menus 33
- 6 Keyboard Commands by Number 37
- 7 Advanced Features 41
- 7.1 Alarm Rules (300 and 500i Series Only) 41
- 7.2 AutoTrack Operation (500i Series Only) 45
- 7.2.1 AutoTrack Settings and Recommendations 45
- 7.2.2 AutoTrack Optimization 46
- 7.3 Virtual Masking (500i Series Only) 47
- 7.4 Privacy Masking (300 and 500i Series Only) 47
- 7.5 Motion Detection with Region of Interest (500i Series Only) (Preset positions 90 through 99) 48
- 7.6 Image Stabilization (500i Series Only) 48
- 7.7 Pre-position Tour 48
- 8 Configuring and Using the IP AutoDome 49
- 8.1 Overview of Features 49
- 8.2 System Requirements 50
- 8.3 Connecting the IP AutoDome to the PC 50
- 8.4 Configuring the IP AutoDome Camera 51
- 8.5 Installing the Required Software 52
- 8.5.1 Changing the Network Settings 55
- 8.6 Main Screen 57
- 8.7 Viewing Live Images and Controlling the AutoDome PTZ 58
- 8.7.1 Establishing a Connection 58
- 8.7.2 Configuring Data Streams 58
- 8.7.3 Controlling Camera Operations 59
- 8.7.4 Entering a Keyboard Control Command 60
- 8.8 Alarm Connections 62
- 8.8.1 Sending an Alarm E-mail 63
- 8.9 Partitioning 64
- 8.9.1 Viewing the Partition Status 68
- 8.9.2 Editing a Partition 70
- 8.9.3 Deleting Recordings 71
- 8.9.4 Deleting all Partitions 71
- 8.10 Recording Scheduler 71
- 8.10.1 Holidays 72
- 8.10.2 Deleting Holidays 72
- 8.10.3 Time Periods 72
- 8.10.4 Activating the Recording 73
- 8.10.5 Recording Status 73
- 8.11 Recording Profiles 73
- 8.12 Alarm Rules 74
- 8.12.1 Creating Alarm Rules 75
- 8.12.2 Alarm Rule Examples 76
- 9 VG4 Audio Connections 81
- 10 Troubleshooting Guide 85
- 1 Getting Started
- 2 On-Screen Display Menu Navigation
- 3 Common AutoDome User Commands (unlocked)
- 4 Alternative Control Protocols
- 5 Pelco On-Screen Menus
- 6 Keyboard Commands by Number
- 7 Advanced Features
- 8 Configuring and Using the IP AutoDome
- 9 VG4 Audio Connections
- 10 Troubleshooting Guide
VG4 AutoDome Modular Camera System Keyboard Commands by Number | en 37
Bosch Security Systems, Inc. User’s Manual F.01U.089.433 | 4.0 | 2008.09
6 Keyboard Commands by Number
Locked
Function
Key
Comm
No.
Command Description Series
200
Series
300
Series
500i
On/Off 1 Scan 360° Autopan without limits
On/Off 2 Autopan Autopan between limits
On/Off 3 Iris Control Enters menu (auto, manual)
On/Off 4 Focus Control Enters menu (spot, auto,
manual)
On/Off 7 Play Custom Pre-position
Tour
Activate/Deactivate
On/Off 8 Play Pre-position Tour Activate/Deactivate
On/Off 9 Inactivity Mode Enters menu (Off, Return to
Scene 1, Recall Previous PTZ
Command)
On/Off 11 Auto Iris Level adjust Enters Iris Level Adjustment
menu
On/Off 14 Set Autopan and Scan
Speed
Enters speed adjustment slide
bar
On/Off 15 Set Pre-position Tour
Period (dwell)
Enters dwell adjustment slide
bar
On/Off 18 AutoPivot Enable Enables/disables AutoPivot
On/Off 20 Backlight Comp Backlight Compensation
On/Off 23 Electronic Shutter Enters Shutter Speed slide bar
On/Off 24 Stabilization Electronic Stabilization
On/Off 26 Wide Dynamic Range
(WDR camera only)
Activate/Deactivate
On/Off 35 White Balance Mode Enters White Balance menu
On 40 Restore Camera Settings Restores all setting to their
original defaults
On/Off 41 Line Lock Phase Adjust Enters delay adjustment slide bar
On/Off 42 Sync Mode On–Line Lock
Off–Internal
On/Off 43 Auto Gain Control AGC–On, Auto, Off
On/Off 44 Sharpness Enters Sharpness menu
On 46 Advanced menu Enters Main Setup menu
On 47 View Factory Settings View all menu default settings
On/Off 50 Playback A, continuous Activate/Deactivate
On/Off 51 Playback A, single Activate/Deactivate
On/Off 52 Playback B, continuous Activate/Deactivate
On/Off 53 Playback B, single Activate/Deactivate
On/Off 56 Night Mode menu On, Off, Auto (Day/Night only)
On/Off 57 Night Mode setting Enables/disables Night Mode
(Day/Night only)