Home Security System User Manual
Table Of Contents
- 1 Getting Started 3
- 2 On-Screen Display Menu Navigation 7
- 3 Common AutoDome User Commands (unlocked) 27
- 4 Alternative Control Protocols 29
- 5 Pelco On-Screen Menus 33
- 6 Keyboard Commands by Number 37
- 7 Advanced Features 41
- 7.1 Alarm Rules (300 and 500i Series Only) 41
- 7.2 AutoTrack Operation (500i Series Only) 45
- 7.2.1 AutoTrack Settings and Recommendations 45
- 7.2.2 AutoTrack Optimization 46
- 7.3 Virtual Masking (500i Series Only) 47
- 7.4 Privacy Masking (300 and 500i Series Only) 47
- 7.5 Motion Detection with Region of Interest (500i Series Only) (Preset positions 90 through 99) 48
- 7.6 Image Stabilization (500i Series Only) 48
- 7.7 Pre-position Tour 48
- 8 Configuring and Using the IP AutoDome 49
- 8.1 Overview of Features 49
- 8.2 System Requirements 50
- 8.3 Connecting the IP AutoDome to the PC 50
- 8.4 Configuring the IP AutoDome Camera 51
- 8.5 Installing the Required Software 52
- 8.5.1 Changing the Network Settings 55
- 8.6 Main Screen 57
- 8.7 Viewing Live Images and Controlling the AutoDome PTZ 58
- 8.7.1 Establishing a Connection 58
- 8.7.2 Configuring Data Streams 58
- 8.7.3 Controlling Camera Operations 59
- 8.7.4 Entering a Keyboard Control Command 60
- 8.8 Alarm Connections 62
- 8.8.1 Sending an Alarm E-mail 63
- 8.9 Partitioning 64
- 8.9.1 Viewing the Partition Status 68
- 8.9.2 Editing a Partition 70
- 8.9.3 Deleting Recordings 71
- 8.9.4 Deleting all Partitions 71
- 8.10 Recording Scheduler 71
- 8.10.1 Holidays 72
- 8.10.2 Deleting Holidays 72
- 8.10.3 Time Periods 72
- 8.10.4 Activating the Recording 73
- 8.10.5 Recording Status 73
- 8.11 Recording Profiles 73
- 8.12 Alarm Rules 74
- 8.12.1 Creating Alarm Rules 75
- 8.12.2 Alarm Rule Examples 76
- 9 VG4 Audio Connections 81
- 10 Troubleshooting Guide 85
- 1 Getting Started
- 2 On-Screen Display Menu Navigation
- 3 Common AutoDome User Commands (unlocked)
- 4 Alternative Control Protocols
- 5 Pelco On-Screen Menus
- 6 Keyboard Commands by Number
- 7 Advanced Features
- 8 Configuring and Using the IP AutoDome
- 9 VG4 Audio Connections
- 10 Troubleshooting Guide
VG4 AutoDome Modular Camera System Index | en 107
Bosch Security Systems, Inc. User’s Manual F.01U.089.433 | 4.0 | 2008.09
93-PRESET 31
94-PRESET
31
95-PRESET 31, 33
96-PRESET 31
97-PRESET
31
98-PRESET 31
99-PRESET
31
AutoScan 31
FastAddress 31
frame scan
31
limit stops 31
PRESET 30
preset tour
31
random scan 31
synchronization mode 31
zero pan
31
menus 33
Bosch 34
Camera Setup
35
night mode 35
white balance 35
Command Lock
34
Other 36
ack 36
acknowledge alarm
36
FastAddress 36
password 36
reset alarm
36
software version 36
PTZ Setup 35
AutoPivot
36
custom tour 36
edit standard tour 36
limit stops
36
presets 36
recordings 36
scan speed
36
Setup 33
ack alarm 34
Bosch menu
33
camera setup 33
command lock
33
FastAddress
33
password 33
PTZ setup 33
reset alarm
34
software version 34
mode 29
PRESET command
30
protocol 29
random scan
31
Setup menu 31
Pelco protocol
address guidelines
30
Pelco-D 29
Pelco-P 29
Pelco-D
29
Pelco-P 29
physical inputs 17
playback
Recording A
28
Recording B 28
port 51
post-alarm
profile
74
time 74
power up events
25
pre-compensation 10
Preposition Tour
custom
27
freeze frame 13
standard
27
preset shot 27, 61
preset tour 31
previous Aux
13
privacy masking 15, 47
protocol
alternative
29
American Dynamics 29
Bilinx 16
IGMP V2
49
Manchester 29
Pelco 29
Pelco-D
29
Pelco-P 29
RS-422 29
Sensormatic
29
TCP/IP 49
UDP 49
PTZ
control
59
fixed speed 13
setup
7, 33
PTZ Setup menu 12, 35
AutoDome orientation 13
autopan
12
AutoPivot 13
AutoScan 12
freeze frame on preposition
13
inactivity 13
previous Aux 13
scene 1
13
inactivity period 13
PTZ fixed speed
13
tilt up limit
13
R
record 36, 49
tour
28
tour A 28
tour B 28
recording
activating
73
alarm track
74
continuous 74
deleting 71
formatting
71
profiles 73
scheduler 71
standard profile
74
status 73
Recording A 28
playback
28
Recording B