Home Security System User Manual
Table Of Contents
- 1 Getting Started 3
- 2 On-Screen Display Menu Navigation 7
- 3 Common AutoDome User Commands (unlocked) 27
- 4 Alternative Control Protocols 29
- 5 Pelco On-Screen Menus 33
- 6 Keyboard Commands by Number 37
- 7 Advanced Features 41
- 7.1 Alarm Rules (300 and 500i Series Only) 41
- 7.2 AutoTrack Operation (500i Series Only) 45
- 7.2.1 AutoTrack Settings and Recommendations 45
- 7.2.2 AutoTrack Optimization 46
- 7.3 Virtual Masking (500i Series Only) 47
- 7.4 Privacy Masking (300 and 500i Series Only) 47
- 7.5 Motion Detection with Region of Interest (500i Series Only) (Preset positions 90 through 99) 48
- 7.6 Image Stabilization (500i Series Only) 48
- 7.7 Pre-position Tour 48
- 8 Configuring and Using the IP AutoDome 49
- 8.1 Overview of Features 49
- 8.2 System Requirements 50
- 8.3 Connecting the IP AutoDome to the PC 50
- 8.4 Configuring the IP AutoDome Camera 51
- 8.5 Installing the Required Software 52
- 8.5.1 Changing the Network Settings 55
- 8.6 Main Screen 57
- 8.7 Viewing Live Images and Controlling the AutoDome PTZ 58
- 8.7.1 Establishing a Connection 58
- 8.7.2 Configuring Data Streams 58
- 8.7.3 Controlling Camera Operations 59
- 8.7.4 Entering a Keyboard Control Command 60
- 8.8 Alarm Connections 62
- 8.8.1 Sending an Alarm E-mail 63
- 8.9 Partitioning 64
- 8.9.1 Viewing the Partition Status 68
- 8.9.2 Editing a Partition 70
- 8.9.3 Deleting Recordings 71
- 8.9.4 Deleting all Partitions 71
- 8.10 Recording Scheduler 71
- 8.10.1 Holidays 72
- 8.10.2 Deleting Holidays 72
- 8.10.3 Time Periods 72
- 8.10.4 Activating the Recording 73
- 8.10.5 Recording Status 73
- 8.11 Recording Profiles 73
- 8.12 Alarm Rules 74
- 8.12.1 Creating Alarm Rules 75
- 8.12.2 Alarm Rule Examples 76
- 9 VG4 Audio Connections 81
- 10 Troubleshooting Guide 85
- 1 Getting Started
- 2 On-Screen Display Menu Navigation
- 3 Common AutoDome User Commands (unlocked)
- 4 Alternative Control Protocols
- 5 Pelco On-Screen Menus
- 6 Keyboard Commands by Number
- 7 Advanced Features
- 8 Configuring and Using the IP AutoDome
- 9 VG4 Audio Connections
- 10 Troubleshooting Guide
VG4 AutoDome Modular Camera System Index | en 105
Bosch Security Systems, Inc. User’s Manual F.01U.089.433 | 4.0 | 2008.09
internal temperature 24
low temperature events
24
low volt events 25
power up events 25
restart events
25
security access 24
video loss events
25
Dibos 50
digital I/O 60
digital zoom
12
DirectX 50, 52
display adjust 14
Display Setup menu
8, 14
camera OSD 14
display adjust 14
privacy masking
15
sector blanking 14
title OSD 14
displaying
camera response information
14
on-screen menus 60
sector titles
14
shot titles 14
software
version
36
titles 14
dual streaming 49
dwell period
28
dwell time 12
E
editing
custom tour 36
password 33, 36
presets
36
standard tour 36
encoder 74
encoding
49
video 49
Ethernet
cable
50, 57
event log 60
extended ATW
9
F
FastAddress 30, 31, 33, 36
files
JPEG
49
M-JPEG 59
MPEG-4 50
focus
59
focus speed 11
G
gain 9, 83, 92
gain control
maximum level
9
gateway address 51
H
high temperature
events 24
threshold 24
holidays
72
homing
events
24
failed 24
I
IGMP V2 49
image stabilization 48
inactivity 13
accessing
28
mode 28
operation 28
period
13
Inactivity Mode menu 28
indoor white balance 9
input commands
18
inputs (1-7) 18
inputs (8-12) 18
inputs setup
17
internal temperature 24
IP 49
.NET
52
address 51, 56
audio 49, 81, 88
DirectX
52
Java 52
module 49
MPEG ActiveX
52
software 52
UDP 88
iris
59
iris speed 11
J
Java 52
JPEG 49
K
keyboard commands 37, 60, 61
#-ENTER 5
Aux Off
18, 19
Aux Off command
60
Aux On 18, 19, 60
OFF-90-ENTER 5, 28
ON-997-ENTER
4
ON-998-ENTER 4
ON-999-ENTER 4
ON-9-ENTER
28
Set 27
SET-100-ENTER
27
SET-802-ENTER 5
Shot 27
keypad
61