Home Security System User Manual
Table Of Contents
- 1 Getting Started 3
- 2 On-Screen Display Menu Navigation 7
- 3 Common AutoDome User Commands (unlocked) 27
- 4 Alternative Control Protocols 29
- 5 Pelco On-Screen Menus 33
- 6 Keyboard Commands by Number 37
- 7 Advanced Features 41
- 7.1 Alarm Rules (300 and 500i Series Only) 41
- 7.2 AutoTrack Operation (500i Series Only) 45
- 7.2.1 AutoTrack Settings and Recommendations 45
- 7.2.2 AutoTrack Optimization 46
- 7.3 Virtual Masking (500i Series Only) 47
- 7.4 Privacy Masking (300 and 500i Series Only) 47
- 7.5 Motion Detection with Region of Interest (500i Series Only) (Preset positions 90 through 99) 48
- 7.6 Image Stabilization (500i Series Only) 48
- 7.7 Pre-position Tour 48
- 8 Configuring and Using the IP AutoDome 49
- 8.1 Overview of Features 49
- 8.2 System Requirements 50
- 8.3 Connecting the IP AutoDome to the PC 50
- 8.4 Configuring the IP AutoDome Camera 51
- 8.5 Installing the Required Software 52
- 8.5.1 Changing the Network Settings 55
- 8.6 Main Screen 57
- 8.7 Viewing Live Images and Controlling the AutoDome PTZ 58
- 8.7.1 Establishing a Connection 58
- 8.7.2 Configuring Data Streams 58
- 8.7.3 Controlling Camera Operations 59
- 8.7.4 Entering a Keyboard Control Command 60
- 8.8 Alarm Connections 62
- 8.8.1 Sending an Alarm E-mail 63
- 8.9 Partitioning 64
- 8.9.1 Viewing the Partition Status 68
- 8.9.2 Editing a Partition 70
- 8.9.3 Deleting Recordings 71
- 8.9.4 Deleting all Partitions 71
- 8.10 Recording Scheduler 71
- 8.10.1 Holidays 72
- 8.10.2 Deleting Holidays 72
- 8.10.3 Time Periods 72
- 8.10.4 Activating the Recording 73
- 8.10.5 Recording Status 73
- 8.11 Recording Profiles 73
- 8.12 Alarm Rules 74
- 8.12.1 Creating Alarm Rules 75
- 8.12.2 Alarm Rule Examples 76
- 9 VG4 Audio Connections 81
- 10 Troubleshooting Guide 85
- 1 Getting Started
- 2 On-Screen Display Menu Navigation
- 3 Common AutoDome User Commands (unlocked)
- 4 Alternative Control Protocols
- 5 Pelco On-Screen Menus
- 6 Keyboard Commands by Number
- 7 Advanced Features
- 8 Configuring and Using the IP AutoDome
- 9 VG4 Audio Connections
- 10 Troubleshooting Guide
VG4 AutoDome Modular Camera System Index | en 103
Bosch Security Systems, Inc. User’s Manual F.01U.089.433 | 4.0 | 2008.09
Index
Symbols
.NET 52
/reset 56
#-ENTER
5
Numerics
33-PRESET 31
34-PRESET
31
92-PRESET 31
93-PRESET 31
94-PRESET
31
95-PRESET 31, 33
96-PRESET 31
97-PRESET
31
98-PRESET 31
99-PRESET 31
A
ack 34, 36
acknowledge 34
acknowledge alarm
36
adjusting
AutoDome orientation 13
brightness
14
camera height 23
vertical position 14
Advanced Feature Setup menu
8, 22
camera height 23
virtual masking
23
AES 10
alarm relay 19
outputs
60
alarm rule 41, 74
Alarm Setup menu 8, 17
input setup
17
inputs (1-7) 18
normally closed supervised contact 18
normally open dry contact
18
normally open supervised contact
18
inputs (8-12) 18
AutoTrack
18
Aux Off
18
Aux On
18
motion detection
18
Shot 18
alarm status 24
American Dynamics
29
audio 49
activating 81
cable
91
connections 81
gain 83, 92
impedance
81
input 81
line level
92
microphone
91, 92
on alarm 63
quality 91, 92
sampling rate
81
auto focus 11
auto iris 11
auto iris level
11
Auto SensUP 9
autobaud 16, 29
AutoDome
IP
.NET
52
/reset
56
audio 49
controlling 58
DirectX
52
dual streaming 49
encoding 49
gateway address
51
IP address 51
Java 52
Livepage
56
MPEG ActiveX 52
multicast 49
network settings page
56
port 51
record 49
snapshots
49
software 52
subnet mask 51
system requirements
50
viewing live images 58
orientation
13
automatic white balance 9
AutoPan 46
autopan
12, 27
AutoPivot 13, 33, 36
AutoScan 12, 31
AutoSensUP maximum
10
AutoTrack 18, 19, 45
camera height 45
field of view recommendations
46
light conditions 46
mount recommendations
45
optimization
46
sensitivity 46
settings 45
with AutoPan
46
Aux Control tab 59, 61
Aux Off 60
Aux Off command
18, 19
Aux On command 18, 19, 60
AWB hold 9
B
backlight compensation 9
baud rate 16
Bilinx
16
BIST 24
Bosch menu
33, 34
built-in self test
24