User Manual Part 1

-12-
The battery is supplied partially charged.
Completely charge the battery before using your
cordless tool for the first time. The lithium ion
battery can be charged at any time, without
reducing its service life. Interrupting the charging
procedure does not damage the battery.
Charger Indicators, symbols and meaning
Operating Instructions
If the indicator lights are “OFF”, the charger is
not receiving power from power supply outlet.
Continuous Light Standby Indicator (green)
A continuous green standby indicator
shows that the working voltage is
applied and that the charger is ready
for use.
Flashing Charge Status Indicator
The charge status indicator
flashes while charging. The
number of green bars indicate
the charge level . All five bars
green means that the battery is fully charged.
The light then changes from flashing to
continuous. Note: The tool and battery can be
removed from the charger at any time and
used.
Continuous Error Indicator (red)
A continuous red error indicator
shows that the battery or the charger
temperature is outside of the
permitted temperature range. As
soon as the permitted temperature range is
reached, the charger automatically begins
charging.
Flashing Error Indicator (red)
A flashing red error indicator signals a
different charger fault. See
‘Troubleshooting’ section.
Wireless Charging Battery
FIG. 10
WIRELESS CHARGING
SURFACE
STANDARD BATTERY
CONTACTS
2610041926 10-15 WC18CV_WC18C 10/7/15 9:07 AM Page 12