User Manual Part 1

-11-
Bottom Mounting Instructions
T
he holster may be mounted to flat surfaces
through the holes in its base (Fig 8). Do not
mount holster upside down (Fig. 9).
Fasten holster securely to
horizontal surfaces with
appropriate hardware. Holster not securely
fastened may become dislodged and lead to
personal injury.
!
WARNING
FIG. 8
HOLSTER
SCREW (4x)
FIG. 9
SCREW (4x)
HORIZONTAL
SURFACE
Power Supply Installation
1. Determine desired mounting position and
orientation.
2. If mounting holes are not available, mark
and pre-drill holes for the four mounting
screws.
3. Attach power supply using suitable
mounting screws (not included).
4. Securely connect charger cable connector
to the power supply cable socket.
To avoid serious injury, the
power supply must be
mounted securely to vehicle wall or rack
storage system by means of the four
mounting holes on power supply housing.
!
WARNING
2610041926 10-15 WC18CV_WC18C 10/7/15 9:07 AM Page 11