Manualshelf

Operating Instructions

ManualsBrandsRobert Bosch Tool ManualsElectronicsMI2C001-001-US
12345678910
MI2C001-001-US
Operating Instructions
© Rosenberger 2019 – www.rosenberger.com
Page 8 of 18
2.
Remove the cover of the jackhammer grip. Get the MI2C001-001-US telematics
unit ready for installation with the battery installed and connected (see Figure 2).
Figure 2: Unit prepared for installation
3.
Connect the line voltage supply leads of the telematics unit to the flat-contact
connectors below the power supply connection for the jackhammer (Figure 3).
The connection leads of the telematics unit must be routed so that they run above
the jackhammer power cable (on the side pointing away from the battery
connector) in the direction of the unit.
Figure 3: Connecting the line voltage supply leads