Operating Instructions

MI2C001-001-US

Page 5 of 18

4 Safety Information

In principle, the device is safe to operate provided that you observe the information in these

operating instructions and on the device itself.

•

The inside of the device contains hazardous electrical circuits that can be lethal

if touched. The device is only to be opened and/or repaired by authorized

personnel. Never open the device and never attempt to carry out any repairs

yourself. Instead, please contact your Customer Service team. For the contact

details, please see the "Service and Maintenance" section.

•

The MI2C001-001-US device is intended for installation inside a type GSH27

jackhammer. Within the context of this end-use application, the requirements

concerning

protection against operator contact,

fire protection,

air gaps and creepage distances,

and the general requirements

must all be observed – while also taking account of the specific usage scenario

and the associated recognized standards of good practice for ensuring safety

and proper functioning.

•

As a component of the GSH27 end-use application, the device is only safe if

used in accordance with the installation and operating instructions provided in

this technical manual.

•

The module does not feature a supply circuit disconnect. A suitable disconnect

switch must be integrated into the supply circuit when installing the device.

•

Before switching on the device, you must make absolutely sure that the line

voltage matches the device supply voltage. For the device specifications,

please refer to the device rating plate or the technical data.

The device rating plate can be found on the device itself.

The technical data for the device can be found in the

"Technical Data" section.

•

Avoid prolonged exposure to high humidity and condensation. Protect the

device against moisture and chemicals.