Operating Instructions

MI2C001-001-US
Operating Instructions
© Rosenberger 2019
– www.rosenberger.com
Page 16 of 18
13 Troubleshooting
Fault description
Possible causes and remedy
Internet application
is not receiving
any data from
device
No power being supplied to device
- Line voltage supply leads defective/not
connected
- Battery not connected / Connection defective
- Battery defective
Remedy:
- Check that leads are connected correctly
- Purchase new battery
- Replace device if defective
If your device cannot be successfully put into operation after using the fault scenarios described
above to identify and subsequently remedy the fault, please send the device to your Customer
Service team for repair. For details of your Customer Service team, please see the "Service and
Maintenance" section.
14 Service and Maintenance / Customer Service
The MI2C001-001-US component does not normally require any maintenance or
servicing. However, in the event of problems or if your device is defective, please
contact our Customer Service department. The device, or any parts thereof, may only
be examined and/or replaced by us.
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Hauptstraße 1
83413 Fridolfing
Germany
Phone: [phone]
www.rosenberger.com
Only authorized specialists are permitted to carry out
troubleshooting by identifying and remedying faults.
•