Operating Instructions

MI2C001-001-US
Operating Instructions
© Rosenberger 2019
– www.rosenberger.com
Page 15 of 18
11 Cleaning the Device
The device does not require cleaning to function correctly. Periodic cleaning at regular
intervals is not necessary.
If you nevertheless wish to clean the device (e.g., if the LEDs are obscured), please
carry out the cleaning process described below:
• Remove the battery (see section titled "Replacing the Battery").
• Clean the device by using a dry microfiber cloth to remove the dirt. The
interior of the battery connector can be blown out with compressed air.
Caution: Wear eye protection!
Do not use any cleaning agents.
• Reinstall the battery at the end of the process.
12 Spare Parts and Accessories
The only way to ensure safe and reliable device operation is to
use the spare parts and accessories listed below. Therefore,
only ever use the spare parts and accessories that have been
officially approved by us. If alternative parts are used, we will
assume no liability in the event of product damage, physical
damage, or personal injury.
Part
Item number
Specifications
Li-ion battery
356549
ABI-L18650-1S1P-DR
It is essential to disconnect the device from the line supply
before cleaning it. To do this, unplug the supply cable from
the power receptacle. Do not immerse the device in water
under any circumstances. Only use the cleaning agents
approved by the manufacturer. For further details, see the
information below.
•
•
•