Operating Instructions

MI2C001-001-US
Operating Instructions
© Rosenberger 2019 – www.rosenberger.com
Page 9 of 18
4. Place the unit in the shell of the jackhammer grip exactly as shown in Figure 4 so
that the unit housing rests on two foam cushions. Gently press the unit against the
foam cushions until the tab (identified by an arrow in the image) clicks into place,
thereby securing the unit.
Figure 4: Mounting the telematics unit
5. Finally, carry out another check to ensure that the power leads and battery cable
have been arranged separately from one another on opposite sides of the unit
(see Figure 4).
6. Attach the cover of the jackhammer grip housing and secure it with four screws
at the points marked in Figure 5.
Figure 5: Sealing the housing shut