Safety Instructions

-11-
Maintenance
Service
NO USER SERVICE-
ABLE PARTS INSIDE.
Preventive maintenance performed by
un au thorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recom mend that all tool
service be performed by a Bosch
Factory Service Center or Authorized
Bosch Service Station. SERVICE MEN:
Disconnect tool and/or charger from
power source before servicing.
Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased tool performance or
significantly shorter running time
between charges then it is time to
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
Cleaning
Certain cleaning
agents and solvents
damage plastic parts. Some of these
are: gasoline, car bon tetrachloride,
chlorinated cleaning solvents, ammonia
and household detergents that contain
ammonia.
To avoid damage, clean the plastic lens
of the cordless floodlight only with a
dry, soft cloth. Do not use cleaning
agents or solvent.
indicator "batteries" may not be equal
to the number of LEDs on the battery
fuel gauge.
D. Power tool nickname tapping on
the pencil icon will let you
customize the tool nickname. You can
also do it when changing the tool
photo.
E. Connection status bar Here you
can see the connection (signal)
strength indicated by vertical bars.
F. LED Turn light on and off
G. Brightness Toggle between off, the
low brightness setting, the medium
brightness setting, and the high
brightness setting.
H. Timer Allow the light or group of
lights to be automatically switched on
or off after a specified amount of
time.
Interval Allow the light or group of
lights to be automatically switched on
or off at a specified time of day.
I. Tool Registration Allows you to
quickly register your tool for
additional ProVantage warranty.
J. PIN Creation Allows you to create
an individual PIN to prevent
unauthorized remote control.
Connectivity
To avoid accidents, always disconnect the battery pack from tool
before servicing or cleaning.
2610055548.qxp_GLI18V-4000C 3/26/20 2:05 PM Page 11