User's Manual

From
Our Reference
Tel
CM-CI1/EHP5
Johann Fuhrmann
[phone]
Issue
Confidential
Topic
Technical Passport Picture V6.40
Car Multimedia
Hildesheim
22 August 16
Page 14 of 23
5.4 Bluetooth Tests
Note that the RF Power on all tests are fixed settings inside module.
They cannot changed.
To start any test it is necessary to type in “./bt_rf_certification_tests.sh” added with the
needed parameters which a described in the following picture:
For example:
Continuous Transmission at 2402MHz with DH5-Packets:
./bt_rf_certification_tests.sh 1 2402 _DH5
Continuous Hopping on all channels with 3-DH5-Packets:
./bt_rf_certification_tests.sh 3 _3DH5 all