User's Manual

PSA RCC manual for radio type approval tests
and iPerf
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
9 / 15
Car Multimedia
EMC-Centre
6 Bluetooth Tests
Note that the RF Power on all tests are fixed settings inside module.
They cannot be changed.
To start any test it is necessary to type in “./bt_rf_certification_tests.sh” added with the needed
parameters which a described in the following picture:
For example:
Continuous Transmission at 2402MHz with DH5-Packets:
./bt_rf_certification_tests.sh 1 2402 _DH5
Continuous Hopping on all channels with 3-DH5-Packets:
./bt_rf_certification_tests.sh 3 _3DH5 all