User's Manual

PSA RCC manual for radio type approval tests
and iPerf
internal: Manual_iPerf_and_RTA_tests_PSA_V2.docx
2016-03-15
15 / 15
Car Multimedia
EMC-Centre
Now start iperf on the DUT. The script will ask for the IP of the iPerf-Server. Type in the IP of the PC
where you started “jPerf”
To stop the script use twice the key combination “STRG” + C or “CTRL” + C
If a failure appears or jPerf stops working activate in addition the Compatibility Mode and repeat the
steps to start the test.