User's Manual

Black plate (47,1)
Cadillac XTS Infotainment System - 2013
Infotainment System 47
When the system begins to
autozoom, it zooms in to its
minimum autozoom level of 50 m.
After the maneuver is performed,
the system slowly zoom back out to
its previous before the maneuver.
Any traffic or POI icons that are
displayed are continued to be
shown throughout the autozoom.
Autozoom Details in 3D Mode
When the next maneuver begins to
be visible on the map in the horizon,
the system begins its autozoom,
keeping the maneuver visible at the
edge of the horizon until it reaches
the minimum autozoom level.
Autozoom Details in 2D Mode
When the next maneuver is within a
defined distance of two miles, the
system slowly begins its zoom in
until it reaches the minimum
autozoom level.
Driving on a Route
Maneuver Criticality
The system is able inform the driver
if a maneuver is critical and must be
executed otherwise it will add a
significant amount of time to the
drive, taking current traffic
conditions into account. This is
intended to help the driver to know
when it is important to execute the
maneuver rather than bypass it.
Normal Maneuver: A normal
maneuver has a low priority
assigned to it, which is anything that
would add less than 10 minutes to
the route. This requires no special
visual attention.
Medium Criticality Maneuver: A
medium criticality maneuver is
anything that would add an
additional 10-20 minutes to the
route. This requires some visual
focus on the additional time and the
maneuver to be painted in a caution
color.
Critical Maneuver: A critical
maneuver is anything that would
add more than 20 minutes to the
route. This may occur if the driver is
supposed to exit before a bridge or
some other road that has few exits
on it. This requires some visual
focus on the additional time and the
maneuver to be painted in a critical
caution color, and an explanation
point icon to be displayed along with
the maneuver.
Maneuver Criticality Based on
Distance
When the navigation routing
preference is set for the shortest
distance, the criticality is then
determined based on added
distance to the original route rather
than time.
Maneuver Road Name
The name of the road that the
maneuver is performing on is shown
in the center of the view either
below the application tray in the
proximity mode, or at the top of the
view in the non-proximity mode.