User's Guide

JOBNAME: 1093929-2013-asd-own PAGE: 44 SESS: 4 OUTPUT: Tue Mar 27 10:39:14 2012

7. Check to make sure that the child restraint is

properly secured prior to each use. If the

seat belt is not locked, repeat steps 1

through 6.

After the child restraint is removed and the seat

belt fully retracted, the ALR mode (child restraint

mode) is canceled.

FORWARD-FACING CHILD

RESTRAINT INSTALLATION USING

LATCH

Refer to all Warnings and Cautions in the “Child

Safety” and “Child Restraint” sections before in-

stalling a child restraint.

Follow these steps to install a forward-facing

child restraint using the LATCH system:

1. Position the child restraint on the seat. Al-

ways follow the child restraint manufactur-

er’s instructions.

2. Secure the child restraint anchor attach-

ments to the LATCH lower anchors. Check

to make sure the LATCH attachment is prop-

erly attached to the lower anchors.

If the child restraint is equipped with a top

tether strap, route the top tether strap and

secure the tether strap to the tether anchor

point. See “Installing top tether strap” in this

section. Do not install child restraints that

require the use of a top tether strap in seat-

ing positions that do not have a top tether

anchor.

Forward-facing web-mounted – step 2

WRS0799

Forward-facing rigid-mounted – step 2

WRS0800

1-28 Safety—Seats, seat belts and supplemental restraint system

Z REVIEW COPY—

2013 Altima Sedan (asd)

Owners Manual—USA_English (nna)

03/24/12—dmoore