User's Guide

JOBNAME: No Job Name PAGE: 236 SESS: 5 OUTPUT: Thu Mar 22 15:15:24 2012 SUM: 4DCFD953
/nissan_pdm/nissancims/owners/asd/og
You can also use the button
to interrupt the system feedback
and give a command at once. See
“List of voice commands” and
“During a call” in this section for
more information.
PHONE/END
While the Voice Recognition sys-
tem is active, press and hold
the
button for 5 seconds to
quit the Voice Recognition system
at any time.
ENTER button / tuning switch
While using the Voice Recogni-
tion system, tilt the tuning switch
up or down to manually control
the phone system. Press the EN-
TER button to select an option on
the display screen.
GETTING STARTED
The following procedures will help you get
started using the BluetoothT Hands-Free Phone
System with NISSAN Voice Recognition. For ad-
ditional command options, refer to “List of voice
commands” in this section.
Choosing a language
You can interact with the BluetoothT Hands-Free
Phone System using English, Spanish or French.
To change the language, perform the following.
1. Press and hold the
button for more
than 5 seconds.
2. The system announces: “Press the
PHONE/SEND (
) button for the
hands-free phone system to enter the voice
adaptation mode or press the PHONE/END
(
) button to select a different lan-
guage.”
3. Press the
button.
For information on voice adaptation, see
“Voice Adaptation (VA) mode” in this sec-
tion.
4. The system announces the current language
and gives you the option to change the lan-
guage to Spanish (in Spanish) or French (in
French). To select the current language,
press the PHONE/SEND (
) button. To
select a different language, tilt the tuning
switch (
or ) up or down.
NOTE:
You must press the
button within 5
seconds to change the language.
5. If you decide not to change the language, do
not press either button. After 5 seconds, the
VR session will end, and the language will
not be changed.
Connecting procedure
NOTE:
The connecting procedure must be per-
formed when the vehicle is stationary. If the
vehicle starts moving during the procedure,
the procedure will be cancelled.
Main Menu
“Connect phone”
s
A
“Add phone”
s
B
Initiate from handset
s
C
Name phone
s
D
module=COM_BT-GEN3-GET-STARTED itdseq=533
module=COM_BT-GEN3-CHOOSE-LANG.13ALT itdseq=534
module=COM_BT-GEN3-PAIR-PROC itdseq=535
4-74 Monitor, climate, audio, phone and voice recognition systems
Z REVIEW COPY—
2013 Altima Sedan (asd)
Owners Manual (owners)—USA_English (nna)
03/22/12—root
X